feat: first pass at new run format

runtime/experiments/common.sh

@@ -1,5 +1,12 @@
 #!/bin/bash
 
+dump_bash_stack() {
+	echo "Call Stack:"
+	for func in "${FUNCNAME[@]}"; do
+		echo "$func"
+	done
+}
+
 log_environment() {
 	if ! command -v git &> /dev/null; then
 		echo "git could not be found"
@@ -35,8 +42,40 @@ log_environment() {
 	echo "*************"
 }
 
+# Given a file, returns the number of results
+# This assumes a *.csv file with a header
+# $1 the file we want to check for results
+# $2 an optional return nameref. If not set, writes results to STDOUT
+get_result_count() {
+	if (($# != 1)); then
+		echo "${FUNCNAME[0]} error: insufficient parameters"
+		dump_bash_stack
+	elif [[ ! -f $1 ]]; then
+		echo "${FUNCNAME[0]} error: the file $1 does not exist"
+		dump_bash_stack
+	fi
+
+	local -r file=$1
+
+	# Subtract one line for the header
+	local -i count=$(($(wc -l < "$file") - 1))
+
+	if (($# == 2)); then
+		local -n __result=$2
+		__result=count
+	else
+		echo "$count"
+	fi
+
+	if ((count > 0)); then
+		return 0
+	else
+		return 1
+	fi
+}
+
 kill_runtime() {
-	echo -n "Running Cleanup: "
+	echo -n "Killing Runtime: "
 	pkill sledgert > /dev/null 2> /dev/null
 	pkill hey > /dev/null 2> /dev/null
 	echo "[DONE]"
@@ -44,18 +83,20 @@ kill_runtime() {
 
 generate_gnuplots() {
 	if ! command -v gnuplot &> /dev/null; then
-		echo "gnuplot could not be found"
+		echo "${FUNCNAME[0]} error: gnuplot could not be found in path"
 		exit
 	fi
 	# shellcheck disable=SC2154
 	if [ -z "$results_directory" ]; then
-		echo "results_directory is unset or empty"
-		exit
+		echo "${FUNCNAME[0]} error: results_directory was unset or empty"
+		dump_bash_stack
+		exit 1
 	fi
 	# shellcheck disable=SC2154
 	if [ -z "$experiment_directory" ]; then
-		echo "experiment_directory is unset or empty"
-		exit
+		echo "${FUNCNAME[0]} error: experiment_directory was unset or empty"
+		dump_bash_stack
+		exit 1
 	fi
 	cd "$results_directory" || exit
 	gnuplot ../../latency.gnuplot
@@ -63,3 +104,24 @@ generate_gnuplots() {
 	gnuplot ../../throughput.gnuplot
 	cd "$experiment_directory" || exit
 }
+
+# Takes a variadic number of paths to *.csv files and converts to *.dat files in the same directory
+csv_to_dat() {
+	if (($# == 0)); then
+		echo "${FUNCNAME[0]} error: insufficient parameters"
+		dump_bash_stack
+	fi
+
+	for arg in "$@"; do
+		if ! [[ "$arg" =~ ".csv"$ ]]; then
+			echo "${FUNCNAME[0]} error: $arg is not a *.csv file"
+			dump_bash_stack
+			exit 1
+		fi
+	done
+
+	for file in "$@"; do
+		echo -n "#" > "${file/.csv/.dat}"
+		tr ',' ' ' < "$file" | column -t >> "${file/.csv/.dat}"
+	done
+}

runtime/experiments/deadline/run.sh

@@ -3,78 +3,250 @@ source ../common.sh
 
 # This experiment is intended to document how the level of concurrent requests influence the latency, throughput, and success/failure rate
 # Use -d flag if running under gdb
+# TODO: GDB? Debug?
+usage() {
+	echo "$0 [options...]"
+	echo ""
+	echo "Options:"
+	echo "  -t,--target=<target url> Execute as client against remote URL"
+	echo "  -s,--serve=<EDF|FIFO>    Serve with scheduling policy, but do not run client"
+}
 
-timestamp=$(date +%s)
-experiment_directory=$(pwd)
-binary_directory=$(cd ../../bin && pwd)
+initialize_globals() {
+	# timestamp is used to name the results directory for a particular test run
+	# shellcheck disable=SC2155
+	declare -gir timestamp=$(date +%s)
 
-schedulers=(EDF FIFO)
-for scheduler in ${schedulers[*]}; do
+	# shellcheck disable=SC2155
+	declare -gr experiment_directory=$(pwd)
 
-	results_directory="$experiment_directory/res/$timestamp/$scheduler"
-	log=log.txt
+	# shellcheck disable=SC2155
+	declare -gr binary_directory=$(cd ../../bin && pwd)
 
-	mkdir -p "$results_directory"
-	log_environment >> "$results_directory/$log"
+	# Scrape the perf window size from the source if possible
+	declare -gr perf_window_path="../../include/perf_window.h"
+	declare -gi perf_window_buffer_size
+	if ! perf_window_buffer_size=$(grep "#define PERF_WINDOW_BUFFER_SIZE" < "$perf_window_path" | cut -d\  -f3); then
+		echo "Failed to scrape PERF_WINDOW_BUFFER_SIZE from ../../include/perf_window.h"
+		echo "Defaulting to 16"
+		declare -ir perf_window_buffer_size=16
+	fi
 
-	# Start the runtime
-	if [ "$1" != "-d" ]; then
-		SLEDGE_NWORKERS=5 SLEDGE_SCHEDULER=$scheduler PATH="$binary_directory:$PATH" LD_LIBRARY_PATH="$binary_directory:$LD_LIBRARY_PATH" sledgert "$experiment_directory/spec.json" >> "$results_directory/$log" 2>> "$results_directory/$log" &
-		sleep 1
-	else
-		echo "Running under gdb"
-		echo "Running under gdb" >> "$results_directory/$log"
+	declare -gx target=""
+	declare -gx policy=""
+	declare -gx role="both"
+}
+
+parse_arguments() {
+	for i in "$@"; do
+		case $i in
+			-t=* | --target=*)
+				if [[ "$role" == "server" ]]; then
+					echo "Cannot set target when server"
+					usage
+					exit 1
+				fi
+				role=client
+				target="${i#*=}"
+				shift # past argument=value
+				;;
+			-s=* | --serve=*)
+				if [[ "$role" == "client" ]]; then
+					echo "Cannot serve with target is set"
+					usage
+					exit 1
+				fi
+				role=server
+				policy="${i#*=}"
+				if [[ ! $policy =~ ^(EDF|FIFO)$ ]]; then
+					echo "\"$policy\" is not a valid policy. EDF or FIFO allowed"
+					usage
+					exit 1
+				fi
+				shift # past argument=value
+				;;
+			-h | --help)
+				usage
+				;;
+			*)
+				echo "$1 is a not a valid option"
+				usage
+				exit 1
+				;;
+		esac
+	done
+
+	# Set globals as read only
+	declare -r target
+	declare -r policy
+	declare -r role
+}
+
+start_runtime() {
+	if (($# != 2)); then
+		echo "${FUNCNAME[0]} error: invalid number of arguments \"$1\""
+		return 1
+	elif ! [[ $1 =~ ^(EDF|FIFO)$ ]]; then
+		echo "${FUNCNAME[0]} error: expected EDF or FIFO was \"$1\""
+		return 1
+	elif ! [[ -d "$2" ]]; then
+		echo "${FUNCNAME[0]} error: \"$2\" does not exist"
+		return 1
 	fi
 
-	inputs=(40 10)
-	duration_sec=15
-	offset=5
+	local -r scheduler="$1"
+	local -r results_directory="$2"
+
+	local -r log_name=log.txt
+	local log="$results_directory/${log_name}"
+
+	log_environment >> "$log"
+
+	SLEDGE_NWORKERS=5 SLEDGE_SCHEDULER=$scheduler PATH="$binary_directory:$PATH" LD_LIBRARY_PATH="$binary_directory:$LD_LIBRARY_PATH" sledgert "$experiment_directory/spec.json" >> "$log" 2>> "$log" &
+	return $?
+}
+
+# Seed enough work to fill the perf window buffers
+run_samples() {
+	local hostname="${1:-localhost}"
 
-	# Execute workloads long enough for runtime to learn excepted execution time
 	echo -n "Running Samples: "
-	for input in ${inputs[*]}; do
-		hey -z ${duration_sec}s -cpus 3 -t 0 -o csv -m GET -d "$input\n" http://localhost:$((10000 + input))
-	done
-	echo "[DONE]"
-	sleep 5
+	hey -n "$perf_window_buffer_size" -c "$perf_window_buffer_size" -cpus 3 -t 0 -o csv -m GET -d "40\n" "http://${hostname}:10040" || {
+		echo "error"
+		return 1
+	}
+
+	hey -n "$perf_window_buffer_size" -c "$perf_window_buffer_size" -cpus 3 -t 0 -o csv -m GET -d "10\n" "http://${hostname}:100010" || {
+		echo "error"
+		return 1
+	}
+
+	return 0
+}
+
+# $1 (results_directory) - a directory where we will store our results
+# $2 (hostname="localhost") - an optional parameter that sets the hostname. Defaults to localhost
+run_experiments() {
+	if (($# < 1 || $# > 2)); then
+		echo "${FUNCNAME[0]} error: invalid number of arguments \"$1\""
+		exit
+	elif ! [[ -d "$1" ]]; then
+		echo "${FUNCNAME[0]} error: \"$2\" does not exist"
+		exit
+	elif (($# > 2)) && [[ ! $1 =~ ^(EDF|FIFO)$ ]]; then
+		echo "${FUNCNAME[0]} error: expected EDF or FIFO was \"$1\""
+		exit
+	fi
+
+	local results_directory="$1"
+	local hostname="${2:-localhost}"
+
+	# The duration in seconds that the low priority task should run before the high priority task starts
+	local -ir offset=5
+
+	# The duration in seconds that we want the client to send requests
+	local -ir duration_sec=15
 
 	echo "Running Experiments"
+
 	# Run each separately
-	hey -z ${duration_sec}s -cpus 4 -c 100 -t 0 -o csv -m GET -d "40\n" http://localhost:10040 > "$results_directory/fib40.csv"
-	hey -z ${duration_sec}s -cpus 4 -c 100 -t 0 -o csv -m GET -d "10\n" http://localhost:10010 > "$results_directory/fib10.csv"
+	echo "Running fib40"
+	hey -z ${duration_sec}s -cpus 4 -c 100 -t 0 -o csv -m GET -d "40\n" "http://${hostname}:10040" > "$results_directory/fib40.csv" || {
+		echo "error"
+		return 1
+	}
+	get_result_count "$results_directory/fib40.csv" || {
+		echo "fib40 unexpectedly has zero requests"
+		return 1
+	}
+
+	echo "Running fib10"
+	hey -z ${duration_sec}s -cpus 4 -c 100 -t 0 -o csv -m GET -d "10\n" "http://${hostname}:10010" > "$results_directory/fib10.csv" || {
+		echo "error"
+		return 1
+	}
+	get_result_count "$results_directory/fib10.csv" || {
+		echo "fib10 unexpectedly has zero requests"
+		return 1
+	}
+
+	# Run concurrently
+	# The lower priority has offsets to ensure it runs the entire time the high priority is trying to run
+	# This asynchronously trigger jobs and then wait on their pids
+	local -a pids=()
+
+	echo "Running fib40_con"
+	hey -z $((duration_sec + 2 * offset))s -cpus 2 -c 100 -t 0 -o csv -m GET -d "40\n" "http://${hostname}:10040" > "$results_directory/fib40_con.csv" &
+	pids+=($!)
 
-	# Run lower priority first, then higher priority. The lower priority has offsets to ensure it runs the entire time the high priority is trying to run
-	hey -z $((duration_sec + 2 * offset))s -cpus 2 -c 100 -t 0 -o csv -m GET -d "40\n" http://localhost:10040 > "$results_directory/fib40-con.csv" &
 	sleep $offset
-	hey -z ${duration_sec}s -cpus 2 -c 100 -t 0 -o csv -m GET -d "10\n" http://localhost:10010 > "$results_directory/fib10-con.csv" &
-	sleep $((duration_sec + offset + 15))
 
-	# Stop the runtime if not in debug mode
-	[ "$1" != "-d" ] && kill_runtime
+	echo "Running fib10_con"
+	hey -z "${duration_sec}s" -cpus 2 -c 100 -t 0 -o csv -m GET -d "10\n" "http://${hostname}:10010" > "$results_directory/fib10_con.csv" &
+	pids+=($!)
+
+	for ((i = 0; i < "${#pids[@]}"; i++)); do
+		wait -n "${pids[@]}" || {
+			echo "error"
+			return 1
+		}
+	done
+
+	get_result_count "$results_directory/fib40_con.csv" || {
+		echo "fib40_con unexpectedly has zero requests"
+		return 1
+	}
+	get_result_count "$results_directory/fib10_con.csv" || {
+		echo "fib10_con has zero requests. This might be because fib40_con saturated the runtime"
+	}
+
+	return 0
+}
+
+process_results() {
+	if (($# != 1)); then
+		echo "${FUNCNAME[0]} error: invalid number of arguments \"$1\""
+		exit
+	elif ! [[ -d "$1" ]]; then
+		echo "${FUNCNAME[0]} error: \"$1\" does not exist"
+		exit
+	fi
+
+	local -r results_directory="$1"
 
-	# Generate *.csv and *.dat results
-	echo -n "Parsing Results: "
+	echo -n "Processing Results: "
 
+	# Write headers to CSVs
 	printf "Payload,Success_Rate\n" >> "$results_directory/success.csv"
 	printf "Payload,Throughput\n" >> "$results_directory/throughput.csv"
 	printf "Payload,p50,p90,p99,p100\n" >> "$results_directory/latency.csv"
 
-	deadlines_ms=(2 2 3000 3000)
-	payloads=(fib10 fib10-con fib40 fib40-con)
+	# The four types of results that we are capturing.
+	# fib10 and fib 40 are run sequentially.
+	# fib10_con and fib40_con are run concurrently
+	local -ar payloads=(fib10 fib10_con fib40 fib40_con)
 
-	for ((i = 0; i < 4; i++)); do
-		# for payload in ${payloads[*]}; do
-		payload=${payloads[$i]}
-		deadline=${deadlines_ms[$i]}
+	# The deadlines for each of the workloads
+	local -Ar deadlines_ms=(
+		[fib10]=2
+		[fib40]=3000
+	)
 
-		# Get Number of Requests
-		requests=$(($(wc -l < "$results_directory/$payload.csv") - 1))
-		((requests == 0)) && continue
+	for payload in "${payloads[@]}"; do
+		# Strip the _con suffix when getting the deadline
+		local -i deadline=${deadlines_ms[${payload/_con/}]}
+
+		# Get Number of Requests, subtracting the header
+		local -i requests=$(($(wc -l < "$results_directory/$payload.csv") - 1))
+		((requests == 0)) && {
+			echo "$payload unexpectedly has zero requests"
+			continue
+		}
 
 		# Calculate Success Rate for csv
 		awk -F, '
 			$7 == 200 && ($1 * 1000) <= '"$deadline"' {ok++}
-			END{printf "'"$payload"',%3.5f%\n", (ok / (NR - 1) * 100)}
+			END{printf "'"$payload"',%3.5f\n", (ok / (NR - 1) * 100)}
 		' < "$results_directory/$payload.csv" >> "$results_directory/success.csv"
 
 		# Filter on 200s, convery from s to ms, and sort
@@ -111,14 +283,129 @@ for scheduler in ${schedulers[*]}; do
 	done
 
 	# Transform csvs to dat files for gnuplot
-	for file in success latency throughput; do
-		echo -n "#" > "$results_directory/$file.dat"
-		tr ',' ' ' < "$results_directory/$file.csv" | column -t >> "$results_directory/$file.dat"
-	done
+	csv_to_dat "$results_directory/success.csv" "$results_directory/throughput.csv" "$results_directory/latency.csv"
 
 	# Generate gnuplots. Commented out because we don't have *.gnuplots defined
 	# generate_gnuplots
+}
+
+run_server() {
+	if (($# != 2)); then
+		echo "${FUNCNAME[0]} error: invalid number of arguments \"$1\""
+		exit
+	elif ! [[ $1 =~ ^(EDF|FIFO)$ ]]; then
+		echo "${FUNCNAME[0]} error: expected EDF or FIFO was \"$1\""
+		exit
+	elif ! [[ -d "$2" ]]; then
+		echo "${FUNCNAME[0]} error: \"$2\" does not exist"
+		exit
+	fi
+
+	local -r scheduler="$1"
+	local -r results_directory="$2"
+
+	start_runtime "$scheduler" "$log" || {
+		echo "${FUNCNAME[0]} error"
+		return 1
+	}
+}
+
+run_client() {
+	results_directory="$experiment_directory/res/$timestamp"
+	mkdir -p "$results_directory"
+
+	run_samples "$target" || {
+		echo "${FUNCNAME[0]} error"
+		exit 1
+	}
+
+	sleep 5
+
+	run_experiments "$target" || {
+		echo "${FUNCNAME[0]} error"
+		exit 1
+	}
+
+	sleep 1
+
+	process_results "$results_directory" || {
+		echo "${FUNCNAME[0]} error"
+		exit 1
+	}
 
-	# Cleanup, if requires
 	echo "[DONE]"
+	exit 0
+
+}
+
+run_both() {
+	local -ar schedulers=(EDF FIFO)
+	for scheduler in "${schedulers[@]}"; do
+		results_directory="$experiment_directory/res/$timestamp/$scheduler"
+		mkdir -p "$results_directory"
+		start_runtime "$scheduler" "$results_directory" || {
+			echo "${FUNCNAME[0]} Error"
+			exit 1
+		}
+
+		sleep 1
+
+		run_samples || {
+			echo "${FUNCNAME[0]} Error"
+			kill_runtime
+			exit 1
+		}
+
+		sleep 1
+
+		run_experiments "$results_directory" || {
+			echo "${FUNCNAME[0]} Error"
+			kill_runtime
+			exit 1
+		}
+
+		sleep 1
+		kill_runtime || {
+			echo "${FUNCNAME[0]} Error"
+			exit 1
+		}
+
+		process_results "$results_directory" || {
+			echo "${FUNCNAME[0]} Error"
+			exit 1
+		}
+
+		echo "[DONE]"
+		exit 0
 	done
+}
+
+main() {
+	initialize_globals
+	parse_arguments "$@"
+
+	echo "$timestamp"
+
+	echo "Target: $target"
+	echo "Policy: $policy"
+	echo "Role: $role"
+
+	case $role in
+		both)
+			run_both
+			;;
+		server)
+			results_directory="$experiment_directory/res/$timestamp"
+			mkdir -p "$results_directory"
+			start_runtime "$target" "$results_directory"
+			exit 0
+			;;
+		client) ;;
+		*)
+			echo "Invalid state"
+			exit 1
+			;;
+	esac
+}
+
+main "$@"